Lasers

Laser control software :
Particulars laser control (Ver. 2.1) is a Microsoft windows application that controls the laser. Unpack it into a desired folder and run the Particulars LASER control.exe. You need to have .NET version 4.0 or higher installed.
Application interfacace for Particulars Lasers :
LabView (LV10 or higher)
Microsoft Visual C++ (VS 2008 or higher)

Scanning TCT data acquisition

PSTCT (Ver. 3.0, built 20.1.2019, note that for analysis the TCTAnalyse V1.1 - latest version - is required.) distribution of a Scanning TCT data acquisition software. It is a Microsoft windows application. Unpack it into a desired folder and run the PSTCT.exe. Latest version includes major changes, such as new file format with additional information (e.g. laser T, housing T, treshold and user supplied parameters ) at every scanning point, integrated laser control, improved beam monitoring.
For running it requires a LabView 2019 Run Time Engine. You may already have it installed if you use products from National Instruments. In most cases for communication with power sources, oscilloscopes and stages NI-VISA driver is required. It can be obtained from National Instruments page or downloaded from here (NI-VISA 19.5 driver) . The drivers/software for the computer controlled stages can be downloaded here (XILab driver) . This has to be installed before running the acquisition software.

Compact TCT data acquisition

Compact TCT (Ver. 3.0, built 7.1.2020) distribution of a Compact TCT data acquisition software. It is a Microsoft windows application. Unpack it into a desired folder and run the CompactTCT.exe.
For running it requires a LabView 2019 Run Time Engine. You may already have it installed if you use products from National Instruments. In some cases for communication with power sources and oscilloscopes driver is required. It can be obtained from National Instruments page or downloaded from here (NI-VISA 19.5 driver) .

Single Waveform Position Scanner

Single Waveform Position Scanner (Ver. 3.0, built 22.1.2020) distribution of Compact-TCT software with added scanning possibility. It is a Microsoft windows application. Unpack it into a desired folder and run the LabScan.exe.
The requirements for running are the same as for Compact-TCT and PSTCT. So it is recommended that you have all the software installed for those two before installing SWPS.

Temperature controller

Temperature controller (Ver. 1.0, built 15.5.2015). It is a Microsoft windows application. Unpack it into a desired folder and run the .exe.
The requirements for running are the same as for Laser application.